Toshiba GR-200 Series Instruction Manual page 660

Transferred information about tripped phase and mode
8.4.2
Information about the tripped phases and mode can be transferred with the signals in Table
8.4-2. For more information about tripped phases and modes, see Chapters 8.1.1(ii) and (iii).
Items
Number of faults recorded
Time at the fault occurrence
Fault phase A
Fault phase A
Fault phase A
Fault phase N
Relay element operated at phase A
Relay element operated at phase B
Relay element operated at phase C
Transferred state information
8.4.3
Information collected by setting [OP Mode ID*] can transferred with the signals in Table 8.4-3.
For more information about the statuses, see Chapters 8.1.3(i) and (ii).
Table 8.4-3 Transferred information by OP mode settings
Items
State taken by setting [OP Mode ID1]
State taken by setting [OP Mode ID2]
State taken by setting [OP Mode ID3]
....
State taken by setting [OP Mode ID128]
Logical state taken by setting [OP Mode ID201]
Logical state taken by setting [OP Mode ID202]
....
Logical state taken by setting [OP Mode ID264]
Table 8.4-2 Transferred information
- 641 -
6F2T0200 (0.15)
Signal names
FLT_CNT
FLT_TM
FLT_PH_A
FLT_PH_B
FLT_PH_C
FLT_PH_N
FLT_OP_A
FLT_OP_B
FLT_OP_C
Signal names
FLTOPM001
FLTOPM002
FLTOPM003
....
FLTOPM128
FLTOPM201
FLTOPM202
....
FLTOPM264
GRE200 (1,2)