Toshiba GR-200 Series Instruction Manual page 655

Trigger settings for PLC programming
8.3.5
In order that the user PLC program is able to command the operation of the disturbance
recorder, the user should set the [Trigger ID1] to [Trigger ID4]. That is, the PLC output points
should be connected with the disturbance recorder using the settings [Trigger ID1] to [Trigger
ID4]; then, set On for the [Trigger SW1] to [Trigger SW4], respectively.
Screen information
8.3.6
Figure 8.3-2 indicates the maximum number of the recording operations as the number is
changed depending on the time settings, which are shown in Table 8.3-1. Figure 8.3-3 shows
the operation time and the date for the disturbance recorder and the figure illustrates five
disturbance phenomena have been memorized in the IED.
Disturbance Record
10:48
_Record List
Number of items
Clear Records
Figure 8.3-2 Running counter and Max number in the disturbance recorder
Screen scroll down
Figure 8.3-3 Detail information in the disturbance recorder
The information in the disturbance recorder are managed in the COMTRADE format,
hence, the user can transferor the disturbance recording file to the PC using the engineering
tool 'GR-TIEMS'. Figure 8.3-4 shows the example of the GR-TIMES screen. For more
Chapter Engineering too
information, see
1/2
>
5/77
+
Max. recording number for Disturbance phenomena
Operating counter
Disturbance Record
10:48
#1 2012-07-25
10:48:21.223
#2 2012-07-21
01:15:55.018
#3 2012/07/21
13:11:29.621
#4 2012-07-02
23:32:09.015
#5 2012-06-20
09:37:48.915
- 636 -
1/5
○
a Disturbance record#1
○
b Disturbance record#2
○
c Disturbance record#3
○
d Disturbance record#4
○
e Disturbance record#5
(→p. 584).
6F2T0200 (0.15)
GRE200 (1,2)