Toshiba GR-200 Series Instruction Manual page 723

Table 10.2-48 Detailed information in Hexadecimal in CHK_ PLC_DAT
Display
area
00000001 No PLC data exists in the
IED.
00000002 Error in input Data
00000004 Error in output Data
00000008 Time over in computation
00000010 PLC stopped by the tool
00010000 Watch dog error
00020000 CPU load exceeded
00040000 File error
00080000 Divided by zero
Top
00100000 Array index out of range
row
00200000 Stack over flow
00400000 System error
00800000 Working memory over flow
01000000 Internal error
Middle
row
Bottom
row
It can be displayed when Data IDs are selected erroneously in DIN function.
2
It can be displayed when Data IDs are selected erroneously in DOUT function.
3
The kind of tasks (Main_1, Main_2, or Main_3) may be too large.
4
The PLC stops manually by the PLC editor.
5
Meaning of the detailed information
Left column
2
3
(No information)
(No information)
- 704 -
00000001 Watch dog error
00000002 CPU load exceeded
00000003 File error
00000004 Test info string error
00000010 PLC stopped
4
00000011 No PLC stop Identifier
5
00000012 Output string is too short
00000013 Input string is too short
00000014 Invalid input parameter
00000015 2nd is of the output string
00000016 Invalid string comparison
00000017 Unsupported type in conversion
00000018 Error in the format string
00000019 Invalid input for format string
0000001A Error during string conversion
0000001B Mismatch in Flash memory
000003E8 Division by zero
000003E9 Array index out of range
000003EA Stack over flow
000003EB System error
000003EC Working memory over flow
6F2T0200 (0.15)
Right column
(No information)
(No information)
GRE200 (1,2)