Toshiba GR-200 Series Instruction Manual page 526

Case and module slot
1/3 size case
5.2.1
Unit structure
(i)
The unit structure is shown in Figure 5.2-1 (a). A unit is made of VCT, CPU, and BIO module.
They are joined using the front panel (HMI). A case will be used to cover the unit. USB port is
provided for the maintenance.
Rear view
(ii)
Figure 5.2-1 (b) and (c) show the rear view and schematic diagram of the rear view. VCT is
mounted at terminal label "VT". IO module "IO#1" is mounted at terminal labels "T1" and
"T2"†. Communication modules are mounted at terminal labels "C1", "C2", and "C3"‡.
Slot identifiers IO#1-2
T2
Terminal label
Short wires
FG terminal
b. Rear view
Figure 5.2-1 Slot and terminals in 1/3 size case
†Note: "IO#1" module is divided by 2: "IO#1-1" and "IO#1-2". Thus, IO#1-1 is mounted at
"T1" and "IO#1-2" is mounted at "T2" (see Chap. 5.6 for more details).
‡Note: For the communication modules, see Chap. 5.5 for more details).
Secondary
Primary
VCT BIO CPU
USB
IO#1-1 VCT
T1 VC
C3
C1 C2
Ground terminal
- 507 -
BIO
Case
a. Unit structure
[IO#1]
T2
Probe
FG
c. Schematic diagram
6F2T0200 (0.15)
Terminals
T1 VC
C3
C1 C2
E
GRE200 (1,2)