Toshiba GR-200 Series Instruction Manual page 685

Statistics data (Counter group)
The user can check the counting numbers provided by the general counter function†. Table
9.6-1 and others show the user to find the count numbers in the counter group.
Counter number
Group
displayed
TRIP COUNT
COUNT2
COUNT3
COUNT4
Counter
ARC CLOSE COMMAND
COUNT6
COUNT7
COUNT32
†Note: See Chapter
‡Note: See Chapter
§Note: See Chapter
Count information on the screen
9.6.1
The user can see the count number in the counter group. Figure 9.6-1 illustrates the count
numbers provided by the TRC function.
Note: See Chapter
Report setting for GCNT (Dead band feature)
9.6.2
The data collected with the GCNT functions will be sent to the network; thus, the user should
set a regulation value using the SD feature in the GCNT function. See Chapter
function for the general: Setting for the report (Dead band)
Table 9.6-1 Counter data
Origin of info (default)
....
General control function: Counter function for the general
Relay application: Trip circuit
Relay application: Autoreclose
Counter
10:48
TRIP COUNT
0
COUNT2 (No Assign) +
0
COUNT3 (No Assign) +
0
Figure 9.6-1 Example of Counter screen
User interface: Monitoring sub-menu: Statistics sub-menu
- 666 -
TRC function‡
(Not assigned)
(Not assigned)
(Not assigned)
ARC function§
(Not assigned)
(Not assigned)
....
(Not assigned)
(→p. 261).
(→p. 233).
1/32
+
(→p. 380).
6F2T0200 (0.15)
Correspondences
to GCNTs†
GCNT01
GCNT02
GCNT03
GCNT04
GCNT05
GCNT06
GCNT07
....
GCNT32
(→p. 380).
(→p. 869).
Counter
GRE200 (1,2)