Hitachi CHROMASTER 5160 Instruction Manual page 508

(4) The following display will be presented.
<Thermo cell selecting screen>
THERMO CELL (NO USE=0, USE=1)
1
Select use (USE=1) or non-use (NO USE=0) of the thermo
cell.
Press a numeric key (0 or 1) and then the ENT key.
* Default value: 1
* Two channels can be selected for two detectors.
(5) Selection or avoidance of the thermo cell is now completed
and the setup initial screen appears.
Under THERMO, the selected channel setting is indicated.
<Setup initial screen>
SETUP: DETECT
CH1
* When you press the ENT key here, the setup items
selecting screen is presented to allow reentry.
Or you can advance to LCD contrast setting.
* The selected setting will be fetched upon turning on
power supply at the next time.
(6) Turn off the power switch.
3 - 48
THERMO CONTRAST
USE 4
S. NO.
02AB-111