Hitachi CHROMASTER 5160 Instruction Manual page 284

3.1 Turning on Power Supply
(1) Initial Screen
Upon turning on power supply to the detector, copyright
indication and program No. Rev. can be checked.
UV-VIS Detector
(C)Hitachi High-Technologies Corp. 2010
After a few seconds, the next screen appears and self-
diagnostic test (initialization) is carried out.
WL DRIVE & LAMP INITIALIZING
When initialization has been normally terminated, the next
screen, or monitor screen appears.
NOTE: If the monitor screen does not appear on the LCD
of UI pad beyond 3 minutes after turning on power
supply, or if an error message appears on the
LCD, refer to "4.5 Troubleshooting" or "4.6 Error
Messages."
3 - 2
8928142-00