Sample Racks; Standard; For Thermostat - Hitachi CHROMASTER 5160 Instruction Manual

6.2 Sample Racks

6.2.1 Standard

6.2.2 For Thermostat

Table 6-2 and 6-3 describes the sample racks that can be used
with the Chromaster 5210 Autosampler.
For using an optional sample rack, rack parameters should be
set so as to match that rack. (For details, refer to 3.2.2 (3) (b)
and the instruction manual for the optional sample rack.)
Used when a thermostat is unused.
Table 6-2 Sample Racks for Standard Autosampler
Part No.
892-0230 Sample rack for
1.5 mL x 120 vials
892-0232 Sample rack for
4 mL x 72 vials
892-0234 Sample rack for
1 mL x 195 vials
892-0236 Sample rack for Microplate
(96 or 384 holes) x 2 plates
Used when a thermostat is installed.
Table 6-3
Part No.
892-0240 Sample rack for
1.5 mL x 120 vials
892-0242 Sample rack for
4 mL x 72 vials
892-0244 Sample rack for
1 mL x 195 vials
892-0246 Sample rack for Microplate
(96 or 384 holes) x 2 plates
6 - 2
Part Name
Sample Racks for Cooling
Part Name
Remarks
Equipped as standard
Deep well plates are
unsuitable.
Remarks
Equipped as
standard
Deep well plates
are unsuitable.