Manual Operation - Hitachi CHROMASTER 5160 Instruction Manual

3.1.6 Manual Operation

The operation is used for delivering liquid under the constant
condition without using a program.
(1) Isocratic Mode
As an example: flow rate at 1.0 ml/min, upper pressure limit
at 20.0 MPa, and lower pressure limit at 0 MPa.
Monitor screen
MANUAL
0
MANUAL: (FLOW=1, PRESS=2)
1
Select Isocratic mode (FLOW)
1 ENT
CONSTANT FLOW
Enter FLOW rate, MAX and MIN pressure limit.
ENT
CONSTANT FLOW
NOTE: The manual operation settings will be deleted when
the power supply is turned off. Conditions must be
set up each time when turning on the power supply.
NOTE: The pump noise will be changed with the operating
condition such as the flow rate, and the pressure.
3 - 11
FLOW MAX MIN
1.000 20.0 0.0
FLOW PRESS
0.000 0.0
[MN]
C 1