Hitachi CHROMASTER 5160 Instruction Manual page 802

No. Display
1 WASH
2 PAUSE
3 UTLTY
SET UP
4 GLP
5 PROG
INSERT
6
△
7
▽
8 START
9 STOP
10 THERMO
11 ESC
LOCK OFF
12 FUNC
13 SELECT
14 DEL
15 IDLE
16 CL
17 ENT
NOTE: Press the ESC key to return to the previous state when an
erroneous operation is made.
NOTE: Editing of a sequential program, addition of an urgent
sample, and an exchange of sample rack can be
performed while it's in the state of PAUSE.
2 - 6
Function
Delivers wash fluid with the wash pump to
rinse out flow paths.
Puts an analysis sequence to pause.
Releases pause when pressed again.
Sets the basic operating conditions.
Keep pressing the wash button and the main
switch at the same time until a setup screen
is displayed. Conditions of thermostat and
the LCD contrast are selected.
Used for confidence-level reporting.
Sets the key lock.
Sets conditions for a sequential program.
Inserts a step in sequential programming.
Scroll up and down display.
Scroll up and down display.
Starts a sequential program.
Stops a sequential program.
Sets the thermostat (option).
Press this key when the basic analysis
condition has been set, when the analysis
condition setting is to be interrupted.
And also press this key for unlocking the
key lock.
Use this key for unlocking the keys.
Moves the mechanism for maintenance,
etc.
Used for selecting a setting item when
setting the rack parameter in the robotic
mode.
Used for deleting a step in a sequential
program.
Returns the autosampler to the idle
position.
Used after a midway stop of a sequential
program, execution of ALL END or
erasure of an error message by CL in the
event of an error.
Used for erasure of data under input.
Also usable for erasure of an error
message at occurrence of an error.
(the CL key is effective while locking the
keyboard.)
Inputs a numeral.