Operational State - Hitachi CHROMASTER 5160 Instruction Manual

3.1.3 Operational State

(4) When the setting condition is cancelled: press the ESC key
to return to the 1
(5) When the setting condition isn't changed/entered: press
the ENT key or the ▽ key to move to the next screen
(Use ▽ and △ keys to move back and forth).
(6) When a program isn't applied, a spectrum can be output
anytime. For this reason, when a spectrum output is
started during an acquisition of chromato data, it will be
output to an integrator.
The UI pad operation will be disabled when a Chromaster
GUI controller and CDS are connected
The pump operational state is indicated below.
Press the key to operate.
* While the pump is in the running state only
INITIAL
INITIAL
INITIAL : Waiting for start in the programming mode.
MANUAL : Running state under the constant condition without
a program.
RUN : Gradient is in execution.
3 - 9
st
monitor screen. And reset a condition.
START
STOP
MANUAL
MANUAL
Fig. 3-2 Pump State
.
RUN
MANUAL