Axle Load" Widget; Tool" Widget - Siemens SINUMERIK 840D sl Universal Operating Manual

Multitouch operation with SINUMERIK Operate
4.5 Expansion with side screen
Only those variables that are currently displayed in the "NC/PLC variables" screen in the
"Diagnostics" operating area are shown. To update the list in the "NC/PLC variables" widget
following a change in the "NC/PLC variables" screen in the "Diagnostics" operating area, collapse
and expand the widget again.
Vertical scrolling is possible.
4.5.8

"Axle load" widget

The widget shows the load on all axles in a bar chart.
Up to 6 axes are displayed. Vertical scrolling is possible if multiple axes are present.
4.5.9

"Tool" widget

The widget contains the geometry and wear data for the active tool.
The following information is additionally displayed depending on the machine configuration:
• EC: Active location-dependent offset - setting up offset
• SC: Active location-dependent offset - additive offset
• TOFF: Programmed tool length offset in WCS coordinates, and programmed tool radius offset
• Override: Value of the overridden movements that were made in the individual tool directions
84
Operating Manual, 07/2021, 6FC5398-6AP40-6BA4
Universal