Creating a G code program
9.1
Graphical programming
Functions
The following functionality is available:
• Technology-oriented program step selection (cycles) using softkeys
• Input windows for parameter assignment with animated help screens
• Context-sensitive online help for every input window
• Support with contour input (geometry processor)
Call and return conditions
• The G functions active before the cycle call and the programmable frame remain active
beyond the cycle.
• The starting position must be approached in the higher-level program before the cycle is
called. The coordinates are programmed in a clockwise coordinate system.
Universal
Operating Manual, 07/2021, 6FC5398-6AP40-6BA4
9
235