Creating A New G Code Program - Siemens SINUMERIK 840D sl Universal Operating Manual
Hide thumbs
Also See for SINUMERIK 840D sl Universal:
- Function manual (2184 pages) ,
- Programming manual (1334 pages) ,
- Commissioning manual (1102 pages)
Table of Contents
Advertisement
See also
Storing any new file (Page 332)
13.4.4
Creating a new G code program
You can create G code programs and then render G code blocks for them in a directory/
workpiece.
Procedure
Universal
Operating Manual, 07/2021, 6FC5398-6AP40-6BA4
5.
Enter the desired workpiece name and press the "OK" softkey.
The directory type (WPD) is set by default.
A new folder with the workpiece name will be created.
The "New G Code Program" window will open.
6.
Press the "OK" softkey again if you want to create the program.
The program will open in the editor.
1.
Select the "Program manager" operating area.
2.
Select the desired storage location and position the cursor on the folder,
in which you would like to store the program.
3.
Press the "New" softkey.
The "New G Code Program" window appears.
4.
If necessary, select a template if any are available.
5.
Select the file type (MPF or SPF).
If you are in the NC memory and have selected the file "Subprograms" or
"Part programs", you can create only one subprogram (SPF) or main pro‐
gram (MPF) respectively.
6.
Enter the desired program name and press the "OK" softkey.
The program type is appropriately specified.
13.4 Creating a directory/program/job list/program list
Managing programs
331
Advertisement
Table of Contents
