Managing programs
13.4 Creating a directory/program/job list/program list
Procedure
13.4.7
Creating a program list
You can also enter programs in a program list that are then selected and executed from the PLC.
The program list may contain up to 100 entries.
Procedure
334
1.
Select the "Program manager" operating area.
2.
Press the "NC" softkey, and in directory "Workpieces" place the cursor on
the program for which you wish to create a job list.
3.
Press the "New" and "Any" softkeys.
The "Any New Program" window opens.
4.
Select entry "Job list JOB" from the "Type" selection field and enter a name
and press the "OK" softkey.
Machine manufacturer
Please refer to the machine manufacturer's specifications.
1.
Select the "Program manager" operating area.
2.
Press the menu forward key and the "Program list" softkey.
The "Prog.-list" window opens.
3.
Place the cursor in the desired line (program number).
4.
Press the "Select program" softkey.
The "Programs" window opens. The data tree of the NC memory with
workpiece, part program and subprogram directory is displayed.
5.
Place the cursor on the desired program and press the "OK" softkey.
The selected program is inserted in the first line of the list together with its
path.
- OR -
Operating Manual, 07/2021, 6FC5398-6AP40-6BA4
Universal