Tool Details; Displaying Tool Details; Cutting Edge Data - Siemens SINUMERIK 840D sl Universal Operating Manual

Tool management

12.9 Tool details

12.9 Tool details
12.9.1

Displaying tool details

The following parameters of the selected tool can be displayed using softkeys in the "Tool
Details" window.
• Tool data

• Cutting edge data

• Monitoring data
Procedure
...
12.9.2 Cutting edge data
The "Tool Details" window provides the following data on the selected tool when the "Cutting
edge data" softkey is active.
298
1. The tool list, the wear list, the OEM tool list or the magazine is opened.
2. Position the cursor to the desired tool.
3. If you are in the tool list or in the magazine, press the ">>" and "Details"
softkey.
- OR -
If you are in the wear list or OEM tool list, press the "Details" softkey.
The "Tool Details" window is displayed.
All of the available tool data is displayed.
5. Press the softkey "Cutting edge data" if you wish to display the cutting
edge data.
6. Press the softkey "Monitoring data" if you wish to display the monitoring
data.
Operating Manual, 07/2021, 6FC5398-6AP40-6BA4
Universal