Siemens SINUMERIK 840D sl Universal Operating Manual page 170

Machining the workpiece
7.10 Editing a program
Setting
Record tools
Display cycles as ma‐
chining step
Highlight selected G
code commands
Font size
Note
All entries that you make here are effective immediately.
Requirement
You have opened a program in the editor.
170
Meaning
Defines whether the tool data is recorded.
• Yes
Recording takes place during processing. The data is stored in a TTD file
(Tool Time Data). The TTD file is located in the directory of the associated
part program.
• No
The tool data is not recorded.
• Yes: The cycle calls in the G code programs are displayed as plain text.
• No: The cycle calls in the G code programs are displayed in the NC syntax.
Defines the display of G code commands.
• No
All G code commands are displayed in the standard color.
• Yes
Selected G code commands or keywords are highlighted in color. Define
the rules for the color assignment in the sleditorwidget.ini configuration
file.
Note: Please observe the information provided by the machine manufac‐
turer.
Note
This setting also has an effect on the current block display.
Defines the font size for the editor and the display of the program sequence.
• auto
If you open a second program, then the smaller font size is automatically
used.
• normal (16) - character height in pixels
Standard font size that is displayed with the appropriate screen resolution.
• small (14) - character height in pixels
More content is displayed in the editor.
Note
This setting also has an effect on the current block display.
Operating Manual, 07/2021, 6FC5398-6AP40-6BA4
Universal