Position Spindle - Siemens SINUMERIK 840D sl Universal Operating Manual
Hide thumbs
Also See for SINUMERIK 840D sl Universal:
- Function manual (2184 pages) ,
- Programming manual (1334 pages) ,
- Commissioning manual (1102 pages)
Table of Contents
Advertisement
6.2.4
Position spindle
Procedure
Note
You can use this function to position the spindle at a specific angle, e.g. during a tool change.
• A stationary spindle is positioned via the shortest possible route.
• A rotating spindle is positioned as it continues to turn in the same direction.
Universal
Operating Manual, 07/2021, 6FC5398-6AP40-6BA4
1.
Select the "JOG" operating mode.
2.
Press the "T, S, M" softkey.
3.
Select the "Stop Pos." setting in the "Spindle M function" field.
The "Stop Pos." entry field appears.
4.
Enter the desired spindle stop position.
The spindle position is specified in degrees.
5.
Press the <CYCLE START> key.
The spindle is moved to the desired position.
Working in manual mode
6.2 Selecting a tool and spindle
129
Advertisement
Table of Contents
