Tool management
12.14 Multiple selection in the tool management lists
12.14
Multiple selection in the tool management lists
Multiple selection is available in the tool management lists.
You select several tools, e.g. to delete them from the list, load them, unload them, or move them
to other magazine locations.
For multiple selection, you use either the "Select" softkey, the touch or mouse controls, or the
cursor keys.
You can use multiple selection for the following tasks:
• Deleting a tool (Page 281)
• Loading and unloading a tool (Page 281)
• Relocating a tool (Page 295)
• Unloading or deleting a tool on the code carrier (Page 284)
• Equipping a multitool with tools (Page 312)
• Removing tools from a multitool (Page 313)
• Deleting a multitool (Page 314)
• Loading and unloading a multitool (Page 314)
• Relocating a multitool (Page 316)
308
Operating Manual, 07/2021, 6FC5398-6AP40-6BA4
Universal