Multitouch operation with SINUMERIK Operate
4.4 Multitouch user interface
4.4.3
Further operator touch controls
Operator control
4.4.4
Virtual keyboard
If you called the virtual keyboard using the function key block, then you have the option of
adapting the key assignment using the shift keys.
①
Shift key for uppercase and lowercase letters
②
Shift key for letters and special characters
③
Shift key for country-specific keyboard assignment
④
Shift key for full keyboard and numerical key block
Input of Chinese characters in the IME editor
You can enter Chinese characters in the IME editor, even when using the virtual keyboard.
For the input of Chinese characters via the virtual keyboard, change the language of the user
interface to Chinese. To display the input field of the IME editor, click on the shift key for country-
specific keyboard assignment "CHS".
78
Function
Advances to the next horizontal softkey bar.
When page 2 of the menu is called, the arrow appears
on the right.
Advances to the higher-level menu.
Advances to the next vertical softkey bar.
Tapping the Cancel alarm symbol clears all queued can‐
cel alarms.
If a channel menu has been configured, it is displayed.
Tapping the channel display in the status display
switches you to the next channel.
Operating Manual, 07/2021, 6FC5398-6AP40-6BA4
Universal