Program editor
Additional functions are available in the editor
• Undo the last change
Undo Ctrl+Z
• Redo the changes that were undone
Redo Ctrl+Y
Up to 50 changes can be undone.
3.4.11
Changing the user interface language
Procedure
Note
Changing the language directly on the input screens
You can switch between the user interface languages available on the controller directly on the
user interface by pressing the key combination <CTRL + L>.
Universal
Operating Manual, 07/2021, 6FC5398-6AP40-6BA4
1.
Select the "Start-up" operating area.
2.
Press the "Change language" softkey.
The "Language selection" window opens. The language set last is selected.
3.
Position the cursor on the desired language.
4.
Press the "OK" softkey.
- OR -
Press the <INPUT> key.
The user interface changes to the selected language.
Fundamentals
3.4 Operator interface
57