Managing programs
13.15 Execution from external memory (EES)
13.15
Execution from external memory (EES)
The "Execution from external storage" function allows you to directly execute any size of part
program from an appropriately configured drive. The behavior is the same as that for execution
from the NC part program memory without the restrictions that apply to "EXTCALL".
Note
Not possible to teach-in program
When an EES program has been selected, it is not possible to teach-in programs.
You have the option of processing the G code programs saved on the configured external drives
as usual in the editor.
When executing the G code programs, you obtain a current block display, as usual. You can edit
the programs directly in the Reset state.
In addition to the current block display, you can also show a basic block display. You can make
corrections with the "Program correction" function, as usual.
356
Software option
You require the "CNC user memory extended" software option in order to use this
function in the user memory (100 MB) of the CompactFlash card.
Software option
In order to use this function without restrictions, e.g. for a network drive or a USB drive,
you require the "Execution from external storage (EES)" software option.
Machine manufacturer
Please observe the information provided by the machine manufacturer.
Operating Manual, 07/2021, 6FC5398-6AP40-6BA4
Universal