Machining the workpiece
7.13 Displaying superimpositions
7.13
Displaying superimpositions
You can display handwheel axis offsets or programmed superimposed movements in the
"Superimpositions" window.
Input field
Tool
Min
Max
DRF
The selection of values displayed in the "Superimposition" window may differ.
Procedure
...
186
Machine manufacturer
Please observe the information provided by the machine manufacturer.
1.
Select the "Machine" operating area.
2.
Press the <AUTO>, <MDI> or <JOG> key.
3.
Press the ">>" and "Superimposition" softkeys.
The "Superimposition" window opens.
4.
Enter the required new minimum and maximum values for superimposi‐
tion and press the <INPUT> key to confirm your entries.
Note:
You can only change the superimposition values in "JOG" mode.
5.
Press the "Superimposition" softkey again to hide the window.
Meaning
Current superimposition in the tool direction
Minimum value for superimposition in the tool direction
Maximum value for superimposition in the tool direction
Displays the handwheel axis offset
Operating Manual, 07/2021, 6FC5398-6AP40-6BA4
Universal