Siemens SINUMERIK 840D sl Universal Operating Manual page 55
Hide thumbs
Also See for SINUMERIK 840D sl Universal:
- Function manual (2184 pages) ,
- Programming manual (1334 pages) ,
- Commissioning manual (1102 pages)
Table of Contents
Advertisement
Key
Nesting functions
Various possibilities are available for the nesting of functions as follows:
• Position the cursor within the bracket of the function call and supplement the argument with
an additional function.
• Highlight the expression which is to be used as an argument in the entry line and then press
the desired function key.
Percentage calculation
The calculator supports the calculation of a percentage, as well as changing of a basic value by
a percentage. Press the following keys in this regard:
Example: Percentage
4
Example: Change by percentage
4
Calculating trigonometric functions
...
Universal
Operating Manual, 07/2021, 6FC5398-6AP40-6BA4
Function
Delete buffer memory contents (Memory Clear)
Delete individual character (Backspace)
Delete expression (Clear Element)
Delete all entries (Clear)
50
50
1.
Check whether the angles are specified in radians "RAD" or in degrees
"DEG".
2.
Press the "RAD" key to calculate the trigonometric functions in degrees
"DEG".
The designation of the key changes to "DEG".
- OR -
Press the "DEG" key to calculate the trigonometric functions in radian.
The designation of the key changes to "RAD".
3.
Press the key for the desired trigonometric function, e.g. "SIN".
4.
Enter the numerical value.
2
6
Fundamentals
3.4 Operator interface
55
Advertisement
Table of Contents
