Siemens SINUMERIK 840D sl Universal Operating Manual page 427

Note
Deleting logbook entries
Up to the completion of the 2nd commissioning, you have the option to delete the logbook
entries up to the time of the first commissioning using the "Clear" softkey.
Searching for a logbook entry
You have the option for searching for specific entries using the search function.
Additional search option
Universal
Operating Manual, 07/2021, 6FC5398-6AP40-6BA4
1. The "Machine logbook" window is opened.
2. Press the "Find" softkey.
3. Enter the desired term in the search form. You can make a search accord‐
ing to date/time, company name/department or according to fault diag‐
nostics/measure.
The cursor is positioned on the first entry that corresponds to the search
term.
4. Press the "Continue search" softkey if the entry found is not the one that
you are looking for.
Press the "Go to Beginning" softkey to start the search at the latest entry.
Press the "Go to End" softkey to start the search at the oldest entry.
Alarm, error, and system messages
17.8 Logbook
427