Function Key Block - Siemens SINUMERIK 840D sl Universal Operating Manual

4.4.2

Function key block

Operator control
Universal
Operating Manual, 07/2021, 6FC5398-6AP40-6BA4
Function
Switch operating area
Tap the current operating area, and select the desired operating area from the
operating area bar.
Switch operating mode
The operating mode is only displayed.
To switch the operating mode, tap the operating area and select the operating
area from the vertical softkey bar.
The selection for the functions available for the operating mode is opened.
Close the selection
The selection for the functions available for the operating mode is closed.
Switching the handwheel on and off
The handwheel is switched on for axis traversing (HT10).
The "Handwheel" operator control has three states:
• Gray: Handwheel not available or not configured.
• Active (not pressed): Handwheel available and configured.
• Shaded (pressed): Handwheel is assigned to the selected axis.
Undo
Multiple changes are undone one by one.
As soon as a change has been completed in an input field, this function is no
longer available.
Restoring
Multiple changes are restored one by one.
As soon as a change has been completed in an input field, this function is no
longer available.
Virtual keyboard
Activates the virtual keyboard.
Calculator
Displays a calculator.
Online help
Opens the online help.
Camera
Generates a screenshot.
Multitouch operation with SINUMERIK Operate
4.4 Multitouch user interface
77