Setting The Multi-Channel View - Siemens SINUMERIK 840D sl Universal Operating Manual

Hide thumbs Also See for SINUMERIK 840D sl Universal:
Table of Contents

Advertisement

10.4

Setting the multi-channel view

Setting
View
Channel selection and se‐
quence
(for "2 - 4 channels" view)
Visible
(for "2 - 4 channels" view)
Example
Your machine has 6 channels.
You configure channels 1 - 4 for the multi-channel view and define the display sequence (e.g.
1,3,4,2).
In the multi-channel view, for a channel switchover, you can only switch between the channels
configured for the multi-channel view; all others are not taken into consideration. Using the
<CHANNEL> key, advance the channel in the "Machine" operating area - you obtain the following
views: Channels "1" and "3", channels "3" and "4", channels "4" and "2". Channels "5" and "6" are
not displayed in the multi-channel view.
In the single-channel view, toggle between all of the channels (1...6) without taking into
account the configured sequence for the multi-channel view.
Using the channel menu, you can always select all channels, also those not configured for multi-
channel view. If you switch to another channel, which is not configured for the multi-channel
view, then the system automatically switches into the single-channel view. There is no
automatic switchback into the multi-channel view, even if a channel is again selected, which has
been configured for multi-channel view.
Procedure
Universal
Operating Manual, 07/2021, 6FC5398-6AP40-6BA4
Meaning
Here, you specify how many channels are displayed.
1 channel
2 channels
3 channels
4 channels
You specify which channels in which sequence are displayed in the multi-
channel view.
Here, you specify which channels are displayed in the multi-channel view.
You can quickly hide channels from the view.
1.
Select the "Machine" operating area.
2.
Select the "JOG", "MDA" or "AUTO" mode.
Multi-channel view
10.4 Setting the multi-channel view
255

Advertisement

Table of Contents
loading

Table of Contents