Bridge - Verizon FiOS-G1100 Quantum User Manual

Connection Type - displays the type of connection.
•
Physical Address - displays the physical address of the
•
network card used for the network
MTU - specifies the Maximum Transmission Unit (MTU)
•
specifies the largest packet size permitted for Internet
transmissions:
– Automatic - sets the MTU at 1500
– Automatic by DHCP - sets the MTU according to the
DHCP connection
– Manual - allows you to manually set the MTU
Internet Protocol - in the internet protocol section, specify
•
one of the following
– Use the Following IP Address - the network connection
uses a permanent or static IP address and subnet mask
address, provided by Verizon or experienced network
technician.

BRIDGE

In the Bridge section of the Configure Network (Home/Office), you can
configure the various LAN interfaces. By default, the Ethernet, Coax,
and Wireless Access Point connections are included in the 'Network
(Home/Office)' bridge.
Caution: Do not change these settings unless specifically instructed to by
Verizon. Changes could adversely affect the operation of your Gateway and
your local network.
verizon.com/fios |
05 / USING NETWORK
CONNECTIONS
©
2014 Verizon. All Rights Reserved.
70