Advertisement
a\o o}a/o
=) ==)
[anes (aac
me
me fe ae:
ooo
CS
Capes
ooo
1]
=
ojo
i24)
Ot OF
Ot Ot
So
(load/eject): Press when inserting or removing
the cassette.
REC MODE selector: Normally set to STANDARD.
When this selector is set to LONG, you can record analog
input signals and digital input signals with 32 kHz in
the long-play mode.
TIMER switch
Normally set to OFF. Use to start recording or playback at
the desired time using a commercially available audio
timer.
[19] Remote sensor
Receives the signal from the Remote Commander.
Remote Commander
[20] DISPLAY MODE button: Press to turn on and off the
indicators in the display.
[2] RMS play buttons
ENTER: To program the selections in a desired order,
press this button after pressing the numeric buttons.
CHECK: Press to check the programmed contents.
fz] REPEAT A~>B button: Press to play back a desired
portion repeatedly.
CD operation buttons
Operative only for the Sony CD player equipped with a
Remote Commander.
It (pause): Sets the CD player in the pause mode during
playback. Press again to release pause. If pressed
twice when the player is in the stop mode, playback
starts.
<4 PPI (AMS): Press to locate the desired selection on
the Compact Disc during playback or in the stop mode.
CD SYNCHRO (CD synchronized recording) buttons
STANDBY: Press to set the unit in the record-standby
mode.
START: Press to start recording of the DAT deck and
then playback of the CD player.
STOP: Press to stop the DAT deck recording and the CD
player playback.
Advertisement
