Advertisement
30
Adjusting Start ID Position P|
To finely adjust the position of a start |D written automatically
during recording, use the rehearsal function described on
page 29.
You can shift the start ID position about 2 seconds backward
or forward. To shift it for more than 2 seconds, first erase the
start ID (see below) and rewrite it manually.
During playback, press START ID WRITE where the start ID to be
shifted is written.
Perform steps 2 and 3 described on page 29, "Writing Start ID
Manually During Playback,"
Erasing StartID
While the start ID you want to erase appears in the display during
playback, press START ID ERASE.
That start ID is erased.
being erased.
If you press START ID ERASE during the stop mode or while
the |START ID] indicator is not in the display
The start ID just before the current position is erased.
When a start ID is erased
if a program number is also written with the start ID, both codes will be
erased at the same time.
Advertisement
