Advertisement
42
Playing Repeatedly (Repeat Play) J
Playing a Selection Repeatedly
Press REPEAT (1/ALL on the Remote Commander)
while the desired selection is played back.
"REPEAT 1" appears.
After the selection is played back, the tape is rewound
to the beginning of that selection , and the playback is
repeated.
Playing all selections repeatedly
During playback, press REPEAT (1/ALL on the
Remote Commander) until "REPEAT ALL" appears
in the display.
After the tape is played back to the end, it is rewound
to the beginning and the playback of all selections is
repeated. In the RMS play (page 47), all the selections
programmed are played back repeatedly.
To stop playing a selection repeatedly
Press REPEAT (1/ALL on the Remote Commander) until
"REPEAT 1" goes off.
Note on the end of the repeated portion during "REPEAT 1" play
The tape is rewound to the beginning of the selection to be repeated
when one of the following is detected.
« Start ID of the next selection
« A blank section of more than 9 seconds
« End of the tape
* Skip ID with SKIP PLAY activated
Number of times to be repeated
The selection to be repeated will be played back 16 times, and then
the tape will stop.
To stop playing all selections repeatedly
Press REPEAT (1/ALL on the Remote Commander) until
"REPEAT ALL" goes off.
Note on the end of the repeated portion during "REPEAT ALL"
play
The tape is rewound to the beginning of the tape when one of the
following is detected.
«End ID
« A blank section of more than 9 seconds
Advertisement
