Advertisement
Playing the selection in a desired order — RMS* play (Using Program Numbers)
CLEAR
CHECK
*sRMS=Random Music Sensor
The RMS function allows you to program the desired
selections in the desired order.
For this operation, program numbers must be written on the tape.
This operation can be performed only with the Remote
Commander.
PGM NO.
AMS
Designate the desired selection by pressing
s |
the numeric number(s) during the stop mode.
Selections numbered 0 to 99 are available.
Lights.
Press ENTER.
{
7
,
The RMS indicator lights after
Indicates the playing order programming the first selection.
Repeat steps 1 and 2.
A maximum of 60 selections can be programmed.
Press.
The programmed selections are played back in the designated order.
To stop RMS play
To cancel the entire program
Press @.
In the stop mode: Press ll once.
In the RMS play mode: Press & twice.
To check the programmed selections
Press CHECK on the Remote Commander. Each time you
press CHECK, the programmed selections appear in the
designated order.
To add a selection to the program
Once the RMS play starts, you cannot add a selection. To add
a selection, stop the RMS play first, and program new
selection(s) by following the procedure described above.
To delete the selection you programmed last
Press CLEAR.
47
Advertisement
