Advertisement
36
Writing End ID
The end ID indicates the last position of the recording or
playback. When recording on the same tape has been done
several times, you can locate the point where the previous
recording terminates quickly, using the end ID.
When the end ID is detected during playback, the playback
stops automatically.
Writing End ID During Recording Po
Press PAUSE, REC MUTE or FADER.
The button you pressed
__The mode of the deck
PAUSE
____Record-pause mode _
REC MUTE
Record-pause mode after a
sound-muted portion is created
for 4 seconds.
FADER
| Record-pause mode after the
; sound fades out.
PGM NO.
Press END ID WRITE.
The EE indicator lights.
(a
Lights.
Press PAUSE or [> (play) to release the record-pause mode.
The end ID is written for about 9 seconds (18 seconds in the long-play
mode). Tape returns to the beginning of the end ID.
After you write an end ID
The portion after the end ID position cannot be played back.
Erase the end ID (page 37) when you want to play back the
portion after the end ID position.
Advertisement
