Advertisement
tivated Operation
1,3
To the switched
To the switched
AC outlet
AC outlet
Use a commercially available audio to activate
recording or playback at a desired time.
Read the operating instructions for the timer and the
amplifier.
Timer Activated Recording
Timer Activated Playback
Turn on the timer.
|
Turn on the timer.
Set the timer to the desired time.
Power to the amplifier and to the DAT deck is turned
off. Leave the power switches of the equipment
turned on.
Set the timer to the desired time.
Power to the amplifier and to the DAT deck is turned
off. Leave the power switches of the equipment
turned on.
Set TIMER to PLAY.
At the preset time, the power is supplied and playback
starts after about 4 seconds.
Set TIMER to REC.
At the preset time, the power is supplied and
recording starts after about 4 seconds.
The AUTO indicator will be the same as the one
before the power of the DAT deck was turned off.
When the AUTO indicator lights, start IDs will be
written during recording.
When timer activated recording is finished
When timer activated playback is finished
Be sure to set TIMER
to OFF.
Normally set the TIMER switch to OFF.
.
|f you want to start playback at the preset time every day
automatically, leave TIMER to PLAY.
elf the TIMER switch is left at the REC position, recording will
start when the power is turned on the next time, and the tape
contents will be erased.
«In timer recording (the TIMER switch is set to REC), the auto
rewind function will not be activated even if the tape is fully
taken up. The tape stops without being rewound so that
recording will not be performed over the previously recorded
material.
Be sure to activate timer recording with the cassette inserted
properly in the cassette compartment. With the cassette
compartment lid opened, timer recording will not function.
Advertisement
