Advertisement
Writing Start ID Manually During Recording sss
Make sure that the AUTO indicator is off. {f itis
not, press START ID AUTO to turn it off.
To start recording, press REC, then press PAUSE or [> (play).
At the desired position, press START ID WRITE.
Blinks.
The start ID is written for 9 seconds (18 seconds in
|
START ID
the long-play mode) from the point where you
Sta
tits, ep
pressed START ID WRITE. While astartIDisbeing
9 "77!'***
written, the] START ID | indicator blinks.
Lights
Writing Start ID Manually During PlaybackfP ssid
During playback, start ID can be written at the desired position
more accurately than during recording.
Press [> to start playback. At the desired position, press START ID
WRITE.
The REHEARSAL indicator lights, and the position for 3 seconds from
the point where you pressed START ID WRITE, is played back
repeatedly (rehearsal function). The beginning of the repeated portion will
be the beginning of the start ID.
Press <4 or PP to adjust the "repeat
start" point.
Blinks.
-startio
The "repeat start" point is shifted
shh Lae Nee
backward with <#@ or forward with PP,
GE ceca sary
by about 0.3 of a second.
Lights. ~SpipanseD
The indicator at the MARGIN shows how
tog
enD a
much the "repeat start" point is shifted
from the point where you pressed START
ID WRITE. It can be shifted up to 70
When you pressed PP twice.
seconds backward or forward.
After setting the beginning of the start ID at the desired point, press
START ID WRITE again.
The WRITE indicator lights steadily and the start ID is written.
The program number is not written.
illustration of the rehearsal function
Point where you pressed
START ID WRITE.
Repeated portion (for 3 seconds)
—»Each time you press P>—>
Each time you press <q
Let
The repeated portion is played back 16 times, and the tape stops.
Advertisement
