Advertisement
Listening to the Beginning of Each Selection Successively — Music Scan (Using Start ID)
For this operation, the start ID codes must be written on the
tape. For how to write the start ID codes, see page 28.
During the stop mode*, press MUSIC SCAN.
The MUSIC SCAN indicator lights.
Press [> (play).
The tape is rewound to the beginning, then the first part of each selection
(start ID position) is played back for 8 seconds sequentially.
& and feMaETID IDj indicators lights dluring playback. gir
Ge] tights.
>
7
4 He
5
ma Giga) ights during
=
sents
playback.
When you press [>> instead of [> (play)
The nearest start ID after the current position is detected, and, after
playing back the first part of that selection for 8 seconds, the next start
{D in the forward direction is located.
This operation continues until the end of the tape.
When you press Ik) instead of [> (play)
The nearest start ID before the current position is detected, and, after
playing back the first part of that selection for 8 seconds, the next start
ID in the reverse direction is located.
This operation continues until the top of the tape.
To listen to the beginning of a selection for more than
8 seconds
Press [> (play) while the selection you want to listen to is
played back.
While pressing [>, the countdown at the MARGIN indicator
stops, and the playback of that selection continues.
To listen to an entire selection
Press MUSIC SCAN while the selection you want to listen to is
played back.
*When you press MUSIC SCAN during playback, the tape is rewound
The music scan function is released, and the playback of that
to the beginning, and then the first part of each selection (start ID
selection continues.
Position) is played back for 8 seconds sequentially.
Advertisement
