Advertisement
Indicators of the INPUT selector
The OPTICAL or COAXIAL indicator lights according to
the position of the INPUT selector. No indicator lights
when the INPUT selector is set to ANALOG.
REPEAT indicators
REPEAT 1: Lights when a desired selection is played
back repeatedly.
REPEAT ALL: Lights when all the selections are played
back repeatedly.
REPEAT A-B: Lights when a desired portion is played
back repeatedly.
[30] DISPLAY mode indicators
DISPLAY OFF indicator lights when peak level meters
and margin indicators are turned off. DISPLAY OFF
AUTO lights momentarily before all the indicators are
turned off.
MUSIC SCAN indicator
Lights after pressing the MUSIC SCAN button to listen to
the beginning of each selection successively.
SKIP PLAY indicator
When this indicator is lit during playback, the portion
marked by the skip ID is skipped and playback continues
from the next start ID.
CAUTION indicator
Lights when moisture condensation occurs. If this
happens, the deck stops functioning automatically. (See
page 5.)
[34] START ID mode indicators
AUTO: Lights when the AUTO button is pressed to write
the start ID automatically.
RENUMBER: Lights when the RENUMBER button is
pressed to renumber the program numbers.
WRITE: Lights when writing the start ID manually.
ERASE: Lights when erasing the start ID.
[38] START ID indicator
Blinks when writing (for 9 or 18 seconds) or erasing a start
ID code, and lights when the start ID is detected during
playback.
SKIP ID indicator
Lights when writing or erasing a skip ID code or when the
skip ID is detected during playback.
SKIP ID mode indicators
WRITE: Lights when writing the skip ID.
ERASE: Lights when erasing the skip ID.
END ID mode indicators
WRITE: Lights when writing the end ID.
ERASE: Lights when erasing the end ID.
MARGIN indicators
Shows how much margin there is between the peak level
of input audio signal and 0 dB.
REHEARSAL indicator
Lights while the rehearsal function is activated (page 29).
fai] Frequencies map
When pressing 4 while keeping COUNTER
MODE
pressed, bars indicating the sampling frequencies with
which the tape was recorded appear on the peak level
meters.
Z| AMS (automatic music sensor)
Shows the number of selections to be skipped ahead or
behind in the AMS operation. When designating a
selection directly by the numeric buttons and the [>
button, the display shows the program number of the
target selection while the selection is being searched for.
When programming the desired selections in the RMS
operation (page 47), the display shows the program
number of the selection to be programmed.
PGM NO./STEP indicators
Shows the program number of the selection being played.
When programming the desired selections in the RMS
operation (page 47), the display shows the step number of
the programmed selection.
Sampling trequency indicators
48 kHz: For recording/playback of analog input signals
(standard mode)
44.1 kHz: For recording/playback of CD and a pre-
recorded DAT cassette
32 kHz: For recording/playback of analog input signals
(long-play mode)
Counter
Displays the linear counter, absolute time, elapsed time of
the selection being played, and the total remaining time of
the tape. Each time COUNTER MODE is pressed, the
display mode changes in turn. (See page 39.)
[a] Peak level meters
Indicate the level of the audio signal being recorded
during recording, and the peak values of the audio signal
recorded on the tape during playback.
Tape operation indicators
REC
}: Lights during recording or in the record-pause
mode.
b>: Lights during recording or playback. It also lights in the
record-pause mode or in the play-pause mode.
ll: Lights in the record-pause mode or in the play-pause
mode.
LONG mode indicator
Lights when recording or playback is being performed in
the long play mode.
11
Advertisement
