Advertisement
34
ah dale me) Con | B)
When the skip ID is detected during playback, the tape skips
to the next start ID position, and the normal playback resumes.
(See page 26 for details.)
Writing Skip ID During Recording
(START ID
Press SKIP ID WRITE at the beginning of the
portion you want to skip later.
==
The skip ID is written for about 1 second (2
amp
Light
seconds in the long-play mode) from where you
ape
momentarily.
pressed the button.
Writing Skip ID During Playback
During playback, skip ID can be written at the desired position
more accurately than during recording.
During playback, press SKIP ID WRITE at the desired position.
The REHEARSAL indicator lights, and the portion for 3 seconds to the
point where you pressed SKIP ID WRITE, is played back repeatedly
{rehearsal function). The end of the repeated portion will be the beginning
of the skip ID.
Press <4 or PP to adjust the "repeat end" point.
The "repeat end" point shifted backward with << or forward with PP,
by 0.3 of a second.
The indicator at the MARGIN shows how much the "repeat end" point is
shifted from the point where you pressed SKIP ID WRITE.
lt can be shifted up to 70 seconds backward or forward.
When you
Lights.
(START
pressed
44 twice.
After setting the beginning of the skip ID at the desired point, press
SKIP ID WRITE again.
The| SKIP ID |lights, and the skip ID is written.
Advertisement
