Advertisement
10
Display Windowh
To turn off the display window
When the power is turned on, the display window also is
turned on. During recording or playback, the display window
can be turned off as follows:
When operating with the front panel controls
While pressing COUNTER
MODE, press 0.
When operating with the Remote Commander
Press DISPLAY MODE.
Each time you press the above buttons, the indicators
changes as follows:
Normal indicators
Peak level meters and margin indicators go off.
(DISPLAY OFF indicator lights.)
All the indicators go off during recording or playback.*
(DISPLAY OFF AUTO indicator lights momentarily just
(before the indicators go off.)
* When pressing COUNTER MODE or DISPLAY MODE,
except during recording or playback, DISPLAY OFF AUTO
lights. In this case, all the indicators go off immediately after
recording or playback starts.
PGM TIME
OPTICAL
h Litem
[TOq
{_ABS TIME
COAXIAL
To change the brightness of the display
window
While pressing COUNTER MODE, press one of the numeric
buttons 1, 2 and 3. The greater number pressed, the darker
the display window becomes.
(When operating with the Remote Commander, also press
COUNTER MODE.)
TOC (Table of contents) indicator
When a pre-recorded DAT cassette is played back, this
indicator will light.
(26] REMAINING (remaining time) indicator
Lights when the counter shows the remaining time of the
tape.
PGM TIME (program time) indicator
Lights when the counter shows the elapsed time of the
current selection.
ABS TIME (absolute time) indicator
Lights when the counter shows the tape running time from
the beginning.
During normal tape counter mode, the above three
indicators all go off.
Fd Fade-in/out indicators
~at| : Lights when recording or playback fades in.
FADE
ee
: Lights when recording or playback fades out.
[ CAUTTO
"|
START TD
AUTO
RENUMBER
WRITE ERASE
ae
@
a
Fa
Advertisement
