Advertisement
32
Renumbering Program Numbers Po
\f you record from the beginning to the middle of a tape on
which another recording has ever been applied, the same
program number may be written twice on that tape.
If you omit designating the next program number when
recording from the middie of the tape, the succeeding program
numbers are not written.
In such cases, proceed as follows to renumber the program
numbers from the beginning of the tape at a high speed.
Renumbering Program Numbers Automatically
The AUTO indicator must be lit, and that the safety tab of the
1
cassette is at the record-possible position.
If the AUTO indicator is not lit, press START ID AUTO.
Press RENUMBER during playback or in the stop mode.
The tape will automatically be rewound to the beginning, and the program
numbers are rearranged from "1" in numerical order at each start ID
position.
While the program numbers are rewritten, the| START |D | indicator
blinks.
When program numbers are written correctly, the tape is fast-forwarded
to the next start ID.
START ID
x
2
p
Siete
adel
=
'
ons
skip
TO
Blinks while the tape is
fast-forwarded to the
END
(tD
program numbers
fae ee)
are rewritten.
When renumbering is terminated
The tape is automatically rewound to the beginning, and the
deck function stops.
Advertisement
