Advertisement
Shifting Start IDs' and Program Numbers
Position
The start ID position may not coincide exactly to the beginning
of the selection, especially when the portion between selection
is not clear. On such a tape, the very beginning of the
selection cannot be located using the AMS function. If this
happens, you can shift the start |D and program number
position.
The AUTO indicator must be off and that the safety tab of
1
the cassette is at the record-possible position.
If the AUTO indicator is lit, press START ID AUTO.
Press RENUMBER during playback or in
the stop mode.
\aitzty.)
Blinks while the
The start ID and program number position of Resa
tae is fast-
the 2nd selection, and the succeeding
Sues
tsdabploiets the
selections, will be shifted forward by about
,
0.3 of
asecond.
When program numbers are written
incorrectly, the renumber function operates.
END
ID:
Erasing a Program Number J
During playback, press START ID ERASE while the program number to
be erased appears in the display window.
That program number is erased. The start ID at the same position also will be
erased.
START ID
b
rogram number
program number
Vues
Ty
Progr
is being erased
—S SELES
SERASI
is being searched
WATEIANN™
for.
When the program number is erased
Playback continues. The succeeding program numbers remain
unchanged. To rearrange the program numbers, renumber
them as described in page 32.
Advertisement
