Download Print this page

Sony DTC-700 Operating Instructions Manual page 19

Digital audio tape deck
Hide thumbs Also See for DTC-700:

Advertisement

To record in the long-play mode, set REC MODE to LONG.
The long-play mode is available for recording analog input signals only.
(See next page.)
7
Press PAUSE or [> (play).
The W indicator goes off, and recording starts.
To write start ID automatically during recording
Make sure that the AUTO indicator is lit.
If not, press START ID AUTO. (See page 28.)
To stop recording
To stop recording
Press @.
To stop recording for a moment"
Press ll.
To release pause and restart recording
Press Hor >.
To remave the cassette
| Press S.
:
* When you press FADER or REC MUTE, the unit will also
enter the record-pause mode.
To designate the program number
Press the desired numeric button. (See page 31.)
When recording from the beginning of the tape, the program
number will be assigned automatically from 1.
To insert sound-muted portion at the beginning
Do not advance the tape with B® or (>. This will leave a blank
section at the beginning. Be sure to proceed with the record
muting function. (See page 21.)
If recording cannot be made
Check the following:
* The safety tab of the cassette is set to the record-inhibit position.
(See page 16.)
No cassette is loaded.
The INPUT selector is set to the incorrect position.
Tape is fully rewound to the end.
The output level of the playback equipment is too low.
The digital copy prohibit signal is written in the codes of the sound
source you want to record. (The PROH indicator appears in the
display window.)
Note on the INPUT selector and the REC MODE selector
Do not change the position of these selectors after recording starts.
If the cassette is ejected after it has been loaded
Check to see if the cassette is inserted correctly. (See page 16.)
When the tape is recorded to the end (Auto rewind function)
The tape is rewound to the beginning and stops automatically. The
auto rewind function is not applied when the TIMER switch is set to
REC.
Accuracy of the electronic linear time counter
The linear time counter provided with this unit is not a clock. The time
indicated by the counter may differ slightly form the actual recording/
Playback time.
19

Advertisement

loading