Advertisement
Fade-iniFade-out Recording Be
FADER
Fade-in Recording
Press REC at the starting point of recording.
The deck enters the record-pause mode.
Press FADER.
The
(_4°Gu) indicator blinks, and the sound fades
in.
Fade-out Recording
Press FADER at the point where you want to start
fading out.
The (m4°E7
indicator blinks, and the sound being
recorded fades out.
A countdown starts, and the deck enters the record-
pause mode after the 0.0s indicator appears.
To designate a desired duration of fade-in/fade-out
You can designate a desired duration of fade-in/fade-out,
from 0.2 seconds to 15 seconds. Fade-in/fade-out is
performed in 5 seconds unless you designate a different
duration.
If you turn off the unit after designating the desired duration
of fade-in/fade-out, the duration is reset to 5 seconds.
1 Choose either "((**25a)" or "(n&2°°)" by pressing
FADER in the stop mode.
2 Designate a desired duration by pressing
<4 orp.
Each time pressing <4 or B®, a duration in the display
changes as follows:
from 0.2 sec. to 3.0 sec.: in 0.2 sec. intervals
from 3.0 sec. to 5.0 sec.: in 0.4 sec. intervals
from 5.0 sec. to 15 sec.: in 1 sec. intervals
Note
Signals output from digital output jacks during recording
do not fade in/fade out.
23
Advertisement
