Advertisement
To Leave No Blank Section (End Search) fees
If the previous recording was applied to the middle of the tape, you must
locate exactly the last point of the recorded area, and start the new recording
from this point. This will prevent leaving a blank section on the tape.
lf you want space between the last recording and the new recording, use O
REC MUTE to mute the sound. (See page 21.)
Press PP.
bons
AMS
The last point of the previous recording (the beginning of the blank section or
the beginning of the end ID*) is located, and the tape stops. When the end ID
is detected, the EE indicator lights.
Note
If the point where you pressed PP is blank, the end search operation will not
function.
* If the end ID is written before the blank section, the end search
operation stops at the beginning of this end ID.
Note on the duration of a blank section
The blank section must last for more than 9 seconds for the end
search operation to function correctly.
22
Advertisement
