Advertisement
Connecting Cord
There are the following three types of connecting jacks at the rear of the deck. Each type of jack requires a different type of
connecting cord.
"LINE IN/QUT (anal input/output) jacks -
OPTICAL
OUT
[CC
————— a
Remove the cap.
Audio signal connecting cord
(supplied, or optional RK-C77 etc.)
White
LINE IN
Coaxial digital connecting cord
COAXIAL
Oe
VMC-1ES etc.)
IN
he
Optical cable (optional POC-15 etc.)
Plug in Lon
Before connection
« Use the connecting cords specified in the illustrations.
e Turn off the power for all equipment before making
connections.
e Be sure to insert the plugs firmly into the jacks. Loose
connections may cause hum and noise. When unplugging,
grasp the plug and not the cord.
Notes on the optical cable
« Do not bend the cord. When the cord is not used, curl it with a
diameter of more than 15 cm (57/s inches).
« Do not use it under high temperatures.
« When the optical cable is not connected, cover the OPTICAL IN/OUT
jacks with the supplied caps.
Note on sound signals
When connecting a digital connecting cord or an optical cable to the
DIGITAL IN/DIGITAL OUT jacks, sound signals (L/R) are transmitted
together through the cord or the cable.
13
Advertisement
