Requirements For Abb Motors, P - ABB ACS580 Series Hardware Manual

98 Guidelines for planning the electrical installation

Requirements for ABB motors, P

See also Abbreviations (page
Motor type Nominal AC line
Random-wound
M2_, M3_ and
M4_
Form-wound HX_
and AM_
1)
Old form-
wound HX_ and
modular
0 V < U n ≤ 500 V
Random-wound
2)
HX_ and AM_
HDP Consult the motor manufacturer.
1) manufactured before 1.1.1998
2) For motors manufactured before 1.1.1998, check for additional instructions with the motor manufacturer.
< 100 kW (134 hp)
n
102).
voltage
Motor insu-
lation sys-
U n ≤ 500 V Standard
500 V < U n ≤
Standard
600 V
Reinforced
600 V < U n ≤ Reinforced
690 V (cable
length ≤ 150 m)
600 V < U n ≤
Reinforced
690 V (cable
length > 150 m)
380 V < U n ≤ Standard
690 V
380 V < U n ≤ Check with
690 V the motor
manufac-
Enamelled
wire with
500 V < U n ≤
fiber glass
690 V
Requirement for
ABB d u /d t and common mode filters, in-
sulated N-end motor bearings
tem
P n < 100 kW and frame size < IEC 315
P n < 134 hp and frame size < NEMA 500
+ N + d u /d t with voltages over 500 V +
turer.
taping
-
+ d u /d t
-
+ d u /d t
-
N/A
CMF
+ N + CMF
+ N + d u /d t + CMF