Terms And Abbreviations - ABB ACS580 Series Hardware Manual

Task
Connect the control cables.
Check the installation.
Commission the drive.

Terms and abbreviations

Term
ACS-AP-S
ACS-BP-S
Brake chopper
Brake resistor
CAIO-01
Capacitor bank
CBAI-01
CCA-01
CDPI-01
CHDI-01
CMOD-01
CMOD-02
Control unit
CPTC-02
DC link
DC link capacitors
DPMP-01
Description
Standard assistant control panel
Basic control panel
Conducts the surplus energy from the intermediate circuit of the
drive to the brake resistor when necessary. The chopper operates
when the DC link voltage exceeds a certain maximum limit. The
voltage rise is typically caused by deceleration (braking) of a high
inertia motor.
Dissipates the drive surplus braking energy conducted by the brake
chopper to heat
CAIO-01 optional bipolar analog input and unipolar analog output
extension module
The capacitors connected to the DC link
Bipolar analog IO extension module
Configuration adapter
Communication adapter module
115/230 V digital input extension module
Multifunction extension module (external 24 V AC/DC and digital
I/O extension)
Multifunction extension module (external 24 V AC/DC and isolated
PTC interface)
The part in which the control program runs.
Multifunction extension module (external 24 V and ATEX/UKEX-cer-
tified PTC interface)
DC circuit between line-side converter and motor-side converter
Energy storage which stabilizes the intermediate circuit DC voltage
Mounting platform for control panel (flush mounting)
Introduction to the manual 31
See
IEC: Connecting the control cables (page 159)
North America: Connecting the control
cables (page 202)
Installation checklist (page 237)
ACS580 standard control program firmware
manual (3AXD50000016097 [English])