Mechanical Installation; Necessary Tools; Unpacking And Examining The Delivery; Installing The Module - ABB ACS580 Series Hardware Manual

￭

Mechanical installation

Necessary tools

• Screwdriver and a set of suitable bits.

Unpacking and examining the delivery

1. Open the option package. Make sure that the package contains:
• the option module
• a mounting screw.
2. Make sure that there are no signs of damage.

Installing the module

See section Installing option modules (page
￭

Electrical installation

WARNING!
Obey the safety instructions of the drive. If you ignore them, injury or
death, or damage to the equipment can occur.
Stop the drive and do the steps in section
before you start the work.
Necessary tools
• Screwdriver and a set of suitable bits.

Wiring

Connect the external cables to the applicable module terminals. Ground the outer
shield of the cables to the SHIELD terminal.
Optional I/O extension and adapter modules 433
164).
Electrical safety precautions (page 24)