ABB ACS550-02 User Manual page 97

Code Description
2007 MINIMUM FREQ
Defines the minimum limit for the drive output frequency.
• A positive or zero minimum speed value defines two ranges,
one positive and one negative.
• A negative minimum speed value defines one speed range.
See figure.
Note! Keep
MINIMUM FREQ
2008 MAXIMUM FREQ
Defines the maximum limit for the drive output frequency.
2013 MIN TORQUE SEL
Defines control of the selection between two minimum torque limits (2015
0 = 1 – Selects 2015
MIN TORQUE
1 = 1 – Defines digital input
DI
• Activating the digital input selects
• De-activating the digital input selects
2...6 = 2... 6 – Defines digital input
DI DI
• See 1 above.
DI
7 = – Defines bit 15 of the Command Word 1 as the control for selecting the minimum limit used.
COMM
• The Command Word is supplied through fieldbus communication.
• The Command Word is parameter 0301.
-1 = 1( ) – Defines an inverted digital input
DI INV
• Activating the digital input selects
• De-activating the digital input selects
-2...-6 = 2( )... 6(
DI INV DI
used.
• See 1( ) above.
DI INV
2014 MAX TORQUE SEL
Defines control of the selection between two maximum torque limits (2017
0 = 1 – Selects 2017
MAX TORQUE
1 = 1 – Defines digital input
DI
• Activating the digital input selects
• De-activating the digital input selects
2...6 = 2... 6 – Defines digital input
DI DI
• See 1 above.
DI
7 = – Defines bit 15 of the Command Word 1 as the control for selecting the maximum limit used.
COMM
• The Command Word is supplied through fieldbus communication.
• The Command Word is parameter 0301.
-1 = 1( ) – Defines an inverted digital input di1 as the control for selecting the maximum limit used.
DI INV
• Activating the digital input selects
• De-activating the digital input selects
-2...-6 = 2( )... 6(
DI INV DI
used.
• See 1( ) above.
DI INV
2015 MIN TORQUE 1
Sets the first minimum limit for torque (%). Value is a percent of the motor nominal torque.
2016 MIN TORQUE 2
Sets the second minimum limit for torque (%). Value is a percent of the motor nominal torque.
≤
.
MAXIMUM FREQ
1 as the minimum limit used.
MIN TORQUE
1 as the control for selecting the minimum limit used.
DI
MIN TORQUE
MIN TORQUE
2... 6 as the control for selecting the minimum limit used.
DI DI
1 as the control for selecting the minimum limit used.
DI
MIN TORQUE
MIN TORQUE
) – Defines an inverted digital input
INV
1 as the maximum limit used.
MAX TORQUE
1 as the control for selecting the maximum limit used.
DI
MAX TORQUE
MAX TORQUE
2... 6 as the control for selecting the maximum limit used.
DI DI
MAX TORQUE
MAX TORQUE
) – Defines an inverted digital input
INV
Freq
P 2008
0
P 2007
Freq
P 2008
P 2007
0
-(P 2007)
-(P 2008)
MIN TORQUE
2 value.
1 value.
1 value.
2 value.
2... 6 as the control for selecting the minimum limit
DI DI
MAX TORQUE
2 value.
1 value.
1 value.
2 value.
2... 6 as the control for selecting the maximum limit
DI DI
2007 value is< 0
Frequency range allowed
2007 value is > 0
Frequency range allowed
Frequency range allowed
1 and 2016
MIN TORQUE
1 and 2018
MAX TORQUE
95
Time
Time
2).
2).
Start-Up