ABB ACS550-02 User Manual page 46

44
• Upload to Panel – Copies all parameters from the drive to the Control Panel. This
includes a second set of parameters (if defined) and internal parameters such as
those created by the Motor Id Run. The Control Panel memory is non-volatile and
does not depend on the panel's battery.
• Restore All (Download To Drive All) – Restores the full parameter set(s) from the
Control Panel to the drive. Use this option to restore a drive, or to configure
identical drives.
Note! The Restore All function writes all parameters to the drive, including motor
parameters. Only use this function to restore a drive, or to transfer parameters to
systems that are identical to the original system.
• Download Application – Copies partial parameter set(s) from the Control Panel to
a drive. The partial set does not include internal motor parameters, parameters
9905...9909, 1605, 1607, 5201, nor any Group 51 parameters. Use this option to
transfer parameters to systems that use similar configurations – the drive and
motor sizes do not need to be the same.
1. Select COPY in the Main Menu.
2. Press UP/DOWN to step to the desired option.
3. Press SAVE.
The parameter set is transferred as directed. During the transfer, the display shows
the transfer status as a percent of completion.
4. Press EXIT to step back to the Output mode.
Clock Set Mode
Use the Clock Set mode to:
• Enable/disable the clock function.
• Set date and time.
• Select display format.
1. Select CLOCK SET in the Main Menu.
2. Press UP/DOWN to step to the desired option.
3. Press EDIT.
4. Press UP/DOWN to select the desired setting.
5. Press SAVE to save setting.
I/O Settings Mode
Use the I/O Setting mode to check (and edit) the setting at any I/O terminal.
1. Select I/O SETTINGS in the Main Menu.
2. Press UP/DOWN to step to the desired I/O group, for example, digital inputs.
3. Press ENTER.
Start-Up